Aquarius Rainwater Harvesting Systems
The Aquarius Rainwater Harvesting system features 3 main ranges;
|
|
|
|
| Garden |
Home |
|
The Garden system is designed for applications which require small or large amounts of water for garden watering, car and vehicle wash to irrigation. The system comes in above ground and below ground models |
The Home system which is designed to be integrated into the household to provide additional low cost water to run appliances such as toilets and washing machines, as well as providing water for the garden if neccesary.
|
| Commercial |
Design your own system |
|
The commercial range features our Aquapod modular storage system .
Each pod is easily connected together to give storage from 3650 litres upwards.
The Aquapod can be installed in stone or in some instances "as dug " material. |
Use the step by step details in the PDF below to help design your own system  |
NEW PRODUCTS . . . .
Slimline Low Profile tank
The NEW slimline tank has been designed so it can pass through internal doorways making logistics and handling extremely easy. With moulded handles at each end and weighing on 62 kilos the Slimline can be lifted easily by two people. As shown below it has also been designed so that our new Rainpac fits onto it in either the horizontal low profile position or the Rainpac can be fitted onto the Slimline in an upright vertical position if required.
Aquatrio Rainwater Filters
Our NEW Aquatrio filter has 3 inlet options as well as 110mm or 160mm main channel connections. Can be used be used as a Pre tank filter as shown below or simply adapted for use inside a tank or storage vessel.
Rainpac Packaged Rainwater Harvesting
The NEW Rainpac features or new Aquatrio filter , Genie Overflow and calmed inlet in a robust hdpe housing complete with cover and frame and untility connection. Rainpac is designed to fit onto concrete chambers, GRP tanks and sumps and PE pipe systems, offering a complete Packaged Rainwater Harvesting System which is quick and easy to fit.
We have taken the work out of cutting and fitting on site.
Just cut out the required hole size, place in the Rainpac's special seal and then push the Rainpac chamber into the seal. Its ready to use . . .
|
